There are several ways to identify hidden water leaks in your home. It’s important to identify these leaks early on. According to the EPA, a leaky faucet dripping at the rate of one drip per second can cause a loss of over 3,000 gallons per year. This is the water that you need to take no less than 180 showers. You can prevent this from happening by using these methods to check for hidden water leaks.
Inspect Your House for Signs of Water Leaks
Before you try any complicated techniques, you must begin by checking the most obvious areas where you will easily notice water leaks. For instance, you must check to see if there are any wet spots or foul smells behind your cabinets and under your sinks. If there is excessive wetness in these areas, then you are dealing with a water leak. You should also check all your connections from water heaters, pumps, valves, and hoses. If there are signs of oxidation on the plumbing components, then there is a leak somewhere. If you can’t notice anything, it’s advisable to find professional plumbers to inspect everything for you.
Pay Close Attention to Your Water Bill
If your bill keeps rising, but you haven’t changed your water usage habits, then you might be dealing with a hidden water leak. For a clearer picture of what will be happening, you can take your bills from the previous months and compare them. There should be a gradual increase in the amounts charged if water is leaking somewhere. While you might not see evidence of water leaks or damage, you will certainly pay for it. If you notice a change in bills, but you can’t detect any signs of water leaking in your home, the best move is to hire professional plumbers.
Check for Leaks Under the Floor
Some signs that there are leaks under the floor include sounds and unexplained moisture. You can go to a quiet room and try to listen for sounds of water dripping or flowing in pipes that shouldn’t have water in them. This usually sounds like a hiss or slight whistle. You should also check your floorboards and feel them for irregularities. If water has soaked into the wood, it will be easy to get an idea of the general area where the leak is located.
These are some of the techniques you can use to tell if there is a water leak somewhere in your home. However, there is a difference between just knowing that there is a leak somewhere and pinpointing the exact location of the leak. For this reason, it is advisable to hire someone who is experienced enough.